LEXUS RX 300

1998 — 2003 of release

Repair and car operation



RX 300 Lexus
+ Lexus RX-300 Cars
+ Governing bodies and operation receptions
- Settings and routine maintenance of the car
   General information
   General information about settings and adjustments
   Schedule of routine maintenance
   Check of levels of liquids, control of leaks
   Check of a condition of tires and pressure of their rating, rotation of wheels
   Replacement of impellent oil and oil filter
   General checks of brake system
   Check and replacement of the salonny filter of a heater and To/in
   Check of a condition and replacement of hoses of an impellent compartment, localization of leaks
   Check of a condition and replacement of belts of a drive of auxiliary units
   Replacement of a filtering element of an air purifier
   Check of a condition of system of production of the fulfilled gases
   Check and replacement of spark plugs
   Replacement of brake liquid, pumping of brake system
   Check of a condition of components of a suspension bracket and steering
   Check of a condition of protective covers of power shafts and driveshaft hinges
   Check of operability of lighting devices, horn and heater fan
   EVAP system check
   Condition check, adjustment and replacement of brushes of screen wipers
   Check of a condition of the battery and care of it
   Replacement of cooling liquid (OZh)
   Check and adjustment of klapanny gaps
   Check and adjustment of a course of pedals of the working and parking brake
   Check of boots of the parking brake
+ Engine
+ Systems of cooling of the engine, heating, ventilation and air conditioning
+ the Power supply system and production of the fulfilled gases
+ Systems of electric equipment of the engine
+ Automatic transmission and interaxal differential
+ Transmission line
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ Schematic diagrams of electric connections




Check of a condition of system of production of the fulfilled gases

 PERFORMANCE ORDER

  1. Check should be made at the cold engine therefore it is better to be engaged in it before the first trip for the present day or not earlier than in three hours after engine switching off. Check a condition of all system of release, beginning from the engine and finishing a cut of an exhaust pipe. In an ideal this check should be carried out at the lifted car when to it there is a free access from below. To Poddomkratta the car and reliably establish it on support.
  2. Check pipes and their connections on existence of signs of leaks, strong corrosion and damages. Check a condition and reliability of fastening of all collars and rubber подвесов systems.
  3. At the same time examine the car bottom on existence of holes, the corrosion, the dispersed seams and the other defects allowing penetration of fulfilled gases in salon of the car. Close up all openings suitable hermetic.
  4. Release system, especially its support and подвесы, often are a source of a roar and other unpleasant sounds. Shake and pull pipes, exhaust silencers and the catalytic converter (at the corresponding complete set). If these components adjoin to elements of a body or suspension bracket details, replace their fixture.
  5. Examine electroconducting a lambda probes, established on reception pipes and behind the back catalytic converter. If necessary replace wiring together with the sensor.
  6. Survey of an internal surface of an exhaust pipe allows to define the current working state of the engine. The structure of deposits in a pipe speaks about quality of settings of the engine. If the pipe from within black and zakopchyonny, can indicate it need of check of fuel system.