LEXUS RX 300

1998 — 2003 of release

Repair and car operation

Introduction

Appointment

This Management was made to help on purpose to the owner of the car to receive from it the maximum return. Performance of this task is reached by several ways. The data collected and presented below allow the owner of a vehicle to be defined in what works on its service should be carried out and when, and also whether has sense to try to execute them independently, or it is necessary to address in representation office of manufacturing firm or a car-care center workshop. Descriptions of procedures of obligatory routine maintenance and car repairs are included in the Management, and also the schedule of their performance is provided. Besides, information on carrying out diagnostics of malfunctions of knots and car systems (in case of their refusal), and also ways of elimination of their reasons is offered.

Instructions for use Management

The management is divided into chapters. Each head is broken into the numbered sections. Sections, in turn, are broken into subsections and where it is required, on under - subsections and consist of paragraphs.

Brought to attention of readers the text is accompanied by explanatory illustrations. References to illustrations are included in the paragraph/paragraph text, which material this illustration is urged to add.

The description once the procedures mentioned in the text usually the second time does not repeat. Instead the reference to the corresponding section/subsection of the corresponding chapter where this procedure already met in case of need becomes.

References to the provision of knot or component at the left or on the right on the car mean finding of the reader by the person forward on a driver's place.

Descriptions of all procedures in this Management are stated in a simple and available form. If accurately to follow instructions in the text and to the accompanying illustrations, no difficulties should arise.

It is necessary to give due consideration to observance of technical requirements and efforts of a tightening of the carving connections given in specifications at the beginning of each chapter. It is necessary to be guided by specifications at performance of all works. In separate sections the necessary sizes and values for adjustment are given not always.

The elementary operations, such as «to open a cowl» or «to weaken wheel nuts», are meant as self-evident and also are mentioned not always.

On the contrary, in the text the most difficult procedures needing the detailed description are in detail stated.