RX 300 Lexus
+ Lexus RX-300 Cars
+ Governing bodies and operation receptions
- Settings and routine maintenance of the car
General information
General information about settings and adjustments
Schedule of routine maintenance
Check of levels of liquids, control of leaks
Check of a condition of tires and pressure of their rating, rotation of wheels
Replacement of impellent oil and oil filter
General checks of brake system
Check and replacement of the salonny filter of a heater and To/in
Check of a condition and replacement of hoses of an impellent compartment, localization of leaks
Check of a condition and replacement of belts of a drive of auxiliary units
Replacement of a filtering element of an air purifier
Check of a condition of system of production of the fulfilled gases
Check and replacement of spark plugs
Replacement of brake liquid, pumping of brake system
Check of a condition of components of a suspension bracket and steering
Check of a condition of protective covers of power shafts and driveshaft hinges
Check of operability of lighting devices, horn and heater fan
EVAP system check
Condition check, adjustment and replacement of brushes of screen wipers
Check of a condition of the battery and care of it
Replacement of cooling liquid (OZh)
Check and adjustment of klapanny gaps
Check and adjustment of a course of pedals of the working and parking brake
Check of boots of the parking brake
+ Engine
+ Systems of cooling of the engine, heating, ventilation and air conditioning
+ the Power supply system and production of the fulfilled gases
+ Systems of electric equipment of the engine
+ Automatic transmission and interaxal differential
+ Transmission line
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ Schematic diagrams of electric connections
|
Settings and routine maintenance of the car
Specifications
Types and volumes of applied greasings and liquids
|
Fuel type
|
Gasoline, is not worse than AI 91 (AI 95 is recommended)
|
|
Volume of a fuel tank, l
|
65
|
|
Type of impellent oil according to the API//ACEA specifications
|
SJ or SH (EC-II)//A2-98
|
| Viscosity of impellent oil according to the SAE specification
|
|
|
5W-30
|
-
At operation at temperatures not below-18 hail
|
10W-30
|
| Volume of impellent oil, l
|
|
|
5.2
|
|
|
|
|
|
4.7
|
|
|
4.5
|
- For level increase from bottom to the top label on щупе, l
|
1.5
|
| Type of transmission oil for (ATF) AT |
T-IV or similar
|
| Volume (full//after an oporozhneniye) ATF, l
|
|
|
8.25/3.5
|
|
|
9.15/4.1
|
| Transmission oil of a transfer case and back differential
|
- Type according to the API specification
|
GL-5
|
- Viscosity according to the SAE specification at operation at temperature:
|
|
|
|
90
|
|
|
80W or 80W-90
|
|
|
0.9 ± 0.05
|
| Amount of greasing of CV JOINTS of power shafts, гр.
|
- Forward power shafts (2WD models)
|
|
|
|
150÷160
|
|
|
|
|
|
43÷53
|
|
|
90÷100
|
- Forward power shafts (4WD models)
|
|
|
|
115÷135
|
|
|
95÷115
|
- Back power shafts (4WD models)
|
|
|
|
107÷117
|
|
|
180÷190
|
| Type of cooling liquid |
On a basis этиленгликоля
|
| Volume of cooling liquid, l |
9.0
|
| Type of brake liquid |
SAE J1703 or FMVSS No. 116 DOT 3
|
| GUR liquid type |
ATF Dexron II or III
|
| Volume of GUR liquid, l |
1.1
|
| Type//quantity (гр.) a coolant To/in |
R134a//650 ± 50
|
| K/V kompressionny oil type |
Nippondenso Oil 8 or similar
|
Engine
| Type of spark plugs//interelectrode gap, mm |
Nippondenso SK20R11//1.0÷1.1, Champion RC8PYPB4//1.0 or NGK IFR6A11//1.0÷ 1.1 |
| Klapannye gaps (at the cooled-down engine), mm |
|
|
0.15÷0.25 |
|
|
0.25÷0.35 |
| Thickness of washers for adjustment of klapanny gaps, mm |
from 2.50 till 3.30 with a step 0.05 |
| Tension of a belt of a drive of the To/in compressor and the generator (on a site between them), N |
|
|
734 ± 115 |
|
|
391 ± 98 |
| Tension of a belt of a drive of the pump GUR, H |
|
|
667÷823 |
|
|
423÷600 |
Brake system
| Free wheeling of a pedal of a brake, mm |
1÷ 6 |
| Distance from the released pedal of a brake to a floor, mm |
193÷203 |
| Distance from 490 N of a pedal of a brake squeezed out with effort to a floor, mm |
not less than 122 |
Number of clicks when raising the lay
brakes at effort of 294 N |
5÷7 |
| Thickness of boots of the parking brake, mm |
|
|
2 |
|
|
1 |
Efforts of a tightening of carving connections, Nanometer
| Nuts of fastening of wheels |
103 |
| Drain stopper of impellent oil |
45 |
| Bolts of fastening of a belt of a drive of the generator and To/in compressor |
|
|
56 |
|
|
18 |
| Fixture of an arm of an adjusting level of a belt of a drive of the generator and To/in compressor |
see. Head of System of cooling of the engine, heating, ventilation and air conditioning
|
| Fixture of a belt of a drive of the pump GUR |
43.1 |
| Drain jams of system of cooling |
- Stopper on a lateral cover of the block of cylinders of 2WD models
|
7 |
|
|
13 |
| Unions of pumping of supports and activator |
8.3 |
| Lock-nut of a press rod of a pedal of a brake |
26 |
| Lock-nuts of a screw coupler of adjustment of the parking brake |
|
|
|
5 |
|
|
12.5 |
|
|