1998 — 2003 of release

Repair and car operation

RX 300 Lexus
+ Lexus RX-300 Cars
+ Governing bodies and operation receptions
- Settings and routine maintenance of the car
   General information
   General information about settings and adjustments
   Schedule of routine maintenance
   Check of levels of liquids, control of leaks
   Check of a condition of tires and pressure of their rating, rotation of wheels
   Replacement of impellent oil and oil filter
   General checks of brake system
   Check and replacement of the salonny filter of a heater and To/in
   Check of a condition and replacement of hoses of an impellent compartment, localization of leaks
   Check of a condition and replacement of belts of a drive of auxiliary units
   Replacement of a filtering element of an air purifier
   Check of a condition of system of production of the fulfilled gases
   Check and replacement of spark plugs
   Replacement of brake liquid, pumping of brake system
   Check of a condition of components of a suspension bracket and steering
   Check of a condition of protective covers of power shafts and driveshaft hinges
   Check of operability of lighting devices, horn and heater fan
   EVAP system check
   Condition check, adjustment and replacement of brushes of screen wipers
   Check of a condition of the battery and care of it
   Replacement of cooling liquid (OZh)
   Check and adjustment of klapanny gaps
   Check and adjustment of a course of pedals of the working and parking brake
   Check of boots of the parking brake
+ Engine
+ Systems of cooling of the engine, heating, ventilation and air conditioning
+ the Power supply system and production of the fulfilled gases
+ Systems of electric equipment of the engine
+ Automatic transmission and interaxal differential
+ Transmission line
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ Schematic diagrams of electric connections

Replacement of cooling liquid (OZh)


  1. Remove the case pallet.
  2. Wait cooling of OZh and carefully uncover a radiator.
  1. Substitute capacity for collecting OZh under drain jams (1) in the engine and a radiator and lower OZh then tighten drain jams with demanded effort (see. Specifications of Control and routine maintenance of the car).
  1. Slowly fill system of cooling with the fresh cooling liquid corresponding to requirements of Specifications of Head of Control and routine maintenance of the car.
  2. Establish a radiator cover, start the engine and let's to it work.
  3. Switch off the engine and if necessary add OZh.
  4. Check cooling system on existence of leakages of OZh (see. Section Check of levels of liquids, control of leaks).
  5. Establish the case pallet.