LEXUS RX 300

1998 — 2003 of release

Repair and car operation



RX 300 Lexus
+ Lexus RX-300 Cars
+ Governing bodies and operation receptions
- Settings and routine maintenance of the car
   General information
   General information about settings and adjustments
   Schedule of routine maintenance
   Check of levels of liquids, control of leaks
   Check of a condition of tires and pressure of their rating, rotation of wheels
   Replacement of impellent oil and oil filter
   General checks of brake system
   Check and replacement of the salonny filter of a heater and To/in
   Check of a condition and replacement of hoses of an impellent compartment, localization of leaks
   Check of a condition and replacement of belts of a drive of auxiliary units
   Replacement of a filtering element of an air purifier
   Check of a condition of system of production of the fulfilled gases
   Check and replacement of spark plugs
   Replacement of brake liquid, pumping of brake system
   Check of a condition of components of a suspension bracket and steering
   Check of a condition of protective covers of power shafts and driveshaft hinges
   Check of operability of lighting devices, horn and heater fan
   EVAP system check
   Condition check, adjustment and replacement of brushes of screen wipers
   Check of a condition of the battery and care of it
   Replacement of cooling liquid (OZh)
   Check and adjustment of klapanny gaps
   Check and adjustment of a course of pedals of the working and parking brake
   Check of boots of the parking brake
+ Engine
+ Systems of cooling of the engine, heating, ventilation and air conditioning
+ the Power supply system and production of the fulfilled gases
+ Systems of electric equipment of the engine
+ Automatic transmission and interaxal differential
+ Transmission line
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ Schematic diagrams of electric connections




General information

Components of an impellent compartment which are subject to regular service

1 — the Cover of a jellied mouth of impellent oil
2 — the Tank of brake liquid
3, 5 — the Assembly block of safety locks
4 — the Storage battery

6 — Shchup of measurement of level of impellent oil
7 — the Tank of liquid of stekloomyvatel
8 — the Broad tank of OZh
9 — the GUR liquid Tank

This head was made to help on purpose to the owner of the car to support the vehicle in a condition of the maximum readiness for operation, receiving from it effective return with observance of requirements to profitability and safety.

At the beginning of head the schedule of routine maintenance of the car is provided. Below the sections devoted to a detailed statement of an order of performance of each of procedures of service separately are offered attention of the reader. Descriptions of visual checks, adjustments, procedures of removal and installation of components are included in a material, and also various good advice and recommendations.

Serving the car according to the stipulated kilometrazhno-time schedule, and following the detailed recommendations provided below, the reader will receive the accurate action program which performance will provide long duration and reliability of service of its vehicle. Remember that this program is made on a complex basis and performance only with neglect others will not lead its separate points to desirable result.

Do not forget as well that at operation severe conditions, such as, at primary operation of the car in a city cycle, frequent movings in the mountain district, towage of the trailer or movement in the conditions of the raised dust content maintenance should be carried out more often.

In the course of service of the car the reader will soon be convinced that many procedures can, and should, to be united in the general groups in view of similarity of the nature or proximity of an arrangement of knots. For example, if the car for any reason is lifted over the earth, it is necessary to use a case and at the same time to check a condition of components of system of production of the fulfilled gases, a suspension bracket and a steering. Also, having hired a dinamometrichesky key, check effort of a tightening of all available carving fixture. Making rotation of wheels, at the same time estimate a condition of brake mechanisms and wheel bearings.

The first step of service of a vehicle always is self-preparation of the performer. Attentively familiarize with a material of the present Chapter, then make the list of components needing attention, prepare the necessary tool and outline the short plan of the forthcoming works. In case of emergence resistant to solution of problems address for the help to specialists of car-care center.