LEXUS RX 300

1998 — 2003 of release

Repair and car operation



RX 300 Lexus
+ Lexus RX-300 Cars
+ Governing bodies and operation receptions
+ Settings and routine maintenance of the car
+ Engine
+ Systems of cooling of the engine, heating, ventilation and air conditioning
+ the Power supply system and production of the fulfilled gases
+ Systems of electric equipment of the engine
+ Automatic transmission and interaxal differential
+ Transmission line
+ Brake system
+ Suspension bracket and steering
+ Body
- Onboard electric equipment
   General information
   Diagnostics of malfunctions of onboard electric equipment - the general information
   Safety locks - the general information
   The relay - the general information and check of serviceability of functioning
   Screen wipers and stekloomyvatel
   Replacement of filament lamps
   Removal and installation of a casing of a steering column and podrulevy switches
   Check of serviceability of functioning of some auxiliary systems
   Removal and aerial installation
   Removal and installation of a combination of devices
   Adjustment of an inclination of headlights
   Removal and installation of components of SRS system
   Removal and installation of components of window regulators and screen wipers
+ Schematic diagrams of electric connections



Removal and aerial installation

The aerial is established in a back part of the car, on the left board.


 PERFORMANCE ORDER

  1. Remove internal furnish of a lateral back window.
  2. Turn out two nuts of fastening of assembly of the aerial.

Aerial fixture

1 — the Cable
2 — the aerial Case
  1. Turn out the top nut and remove an aerial fringing from a body.
  2. Disconnect from the aerial a cable and electroconducting.
  3. Installation is made upside-down.