| Palpation of the driveshaft, mm |
no more than 0.8 |
| Palpation of intermediate section of the driveshaft, mm |
no more than 0.8 |
| Palpation of flanges of intermediate section of the driveshaft |
no more than 0.1 |
| Free wheeling of a power shaft in the axial direction, mm |
2 ÷ 3 |
| Type and amount (g) of greasing for stuffing of covers of CV JOINTS of power shafts |
|
|
Yellow, 115 ÷ 135 |
|
|
Gray, 95 ÷ 115 |
| Type and amount (g) of greasing for stuffing of covers of hinges of back power shafts |
|
|
Gray, 107 ÷ 117 |
|
|
Yellow, 180 ÷ 190 |
| Standard length of power shafts, mm |
|
|
563.2 ± 2.0 |
|
|
914.8 ± 2.0 |
| Standard length of back power shafts, mm |
607.7 ÷ 5.0 |
| Gap in the lock of a collar of a protective cover of the external CV JOINT of a power shaft, mm |
1.2 ÷ 4.0 |
| Depth of a press fitting of a forward epiploon of back differential, mm |
2.0 |
| Depth of a press fitting forward lateral epiploons of back differential, mm |
0 |
| Palpation of a connecting flange of back differential, mm |
no more than 0.1 |
| Axial palpation of a conducted gear wheel of back differential, mm |
no more than 0.07 |
| Axial люфт a conducted gear wheel of back differential, mm |
0.13 ÷ 0.18 |
| Axial люфт lateral gear wheel of back differential, mm |
0.05 ÷ 0.20 |
| Pretightness of the bearing of a leading gear wheel of back differential, Nanometer |
|
|
1.1 ÷ 1.7 |
|
|
0.6 ÷ 0.9 |
| Full preloading of back differential, Nanometer |
0.3 ÷ 0.5 + bearing pretightness ведущёй gear wheels |
| Thickness of persistent washers of lateral gear wheels of back differential, mm of ± 0.02 mm |
0.95 ÷ 1.40 with a step 0.05 |
| Thickness of persistent washers of a conducted gear wheel of differential, mm of ± 0.01 mm |
0.22 ÷ 3.21 with a step 0.03 |
| Thickness of washers for gap adjustment between conducted and conducting gear wheels of back differential, mm of ± 0.01 mm |
2.27 ÷ 2.69 with a step 0.03 |
| Wheel nuts |
103 |
| Stupichnye of a nut |
|
|
294 |
|
|
216 |
| Bolt of fastening of sensors of speed of ABS |
|
|
8 |
|
|
20 |
| Bolts of fastening of kardanny hinges to back differential and AT |
74 |
| Connecting bolts of back and central sections of the driveshaft |
27 |
| Bolts of fastening of support of the driveshaft |
37 |
| Nuts of fastening of flanges of the driveshaft |
1st approach
|
181 |
2nd approach
|
69 |
| Drain and jellied jams of back differential |
49 |
| Nut of fastening of a connecting flange of back differential |
108 ÷ 235 |
| Fixture of the central and back sections of an exhaust pipe |
43 |
| Bolts of fastening of a damper of back differential |
95 |
| Bolts of fastening of a cross-section beam of a back suspension bracket to a stretcher |
137 |
| Bolts of fastening of back differential to a cross-section beam of a back suspension bracket |
103 |
| Fixture of a back stretcher to a body |
|
|
83 |
|
|
181 |
| Bolts of fastening of the case of the internal hinge of a back power shaft to differential |
56 ÷ 69 |
| Bolts of fastening of lock plates to a differential box |
97 |
| Bolts of fastening of covers of bearings to a casing of fastening of differential |
79 |
| Bolts of fastening of maslootrazhatel on a cover of a casing of fastening of back differential |
7.4 |
| Stopper сапуна back differential |
21 |
| Bolts of fastening of a casing of fastening of back differential |
47 |