LEXUS RX 300

1998 — 2003 of release

Repair and car operation


RX 300 Lexus
+ Lexus RX-300 Cars
+ Governing bodies and operation receptions
+ Settings and routine maintenance of the car
+ Engine
+ Systems of cooling of the engine, heating, ventilation and air conditioning
+ the Power supply system and production of the fulfilled gases
+ Systems of electric equipment of the engine
+ Automatic transmission and interaxal differential
+ Transmission line
+ Brake system
- Suspension bracket and steering
   General information
   - Forward suspension bracket
      Removal, dismantling, assembly and installation of a nave and rotary fist
      Removal, dismantling assembly and installation of a rack of a suspension bracket
      Removal and installation of the bottom lever of a suspension bracket
      Check and replacement of a spherical support of a suspension bracket
      Removal, installation and check of the stabilizer of a suspension bracket
   + Back suspension bracket
   + Steering
   + suspension bracket Geometry
+ Body
+ Onboard electric equipment
+ Schematic diagrams of electric connections



Removal and installation of the bottom lever of a suspension bracket

Components of installation of the bottom lever of a suspension bracket

1 — the Stopper of the plug of the bottom lever of a suspension bracket
2 — Nizhny the suspension bracket lever
3 — the Bottom spherical support


 PERFORMANCE ORDER

  1. Remove a forward wheel.
  2. Turn out a bolt and two nuts and disconnect the bottom lever of a suspension bracket from a spherical support.
  3. Turn out two bolt and on the forward party of the bottom lever of a suspension bracket, and then a bolt on its back party.
  4. Remove the bottom lever of a suspension bracket.
  5. Remove from the lever a stopper of its plug.
  6. Installation is made upside-down. In summary check corners of installation of forward wheels.