canadian drug

LEXUS RX 300

1998 — 2003 of release

Repair and car operation



RX 300 Lexus
+ Lexus RX-300 Cars
+ Governing bodies and operation receptions
+ Settings and routine maintenance of the car
+ Engine
+ Systems of cooling of the engine, heating, ventilation and air conditioning
+ the Power supply system and production of the fulfilled gases
+ Systems of electric equipment of the engine
+ Automatic transmission and interaxal differential
- Transmission line
   General information
   Removal and driveshaft installation
   Removal, dismantling, assembly and installation of forward power shafts
   Removal, dismantling, assembly and installation of back power shafts
   Replacement of a forward epiploon of back differential
   Replacement of lateral epiploons of back differential
   Removal and installation of the case of back differential, differential dismantling
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ Schematic diagrams of electric connections



Replacement of lateral epiploons of back differential

Components of installation of lateral epiploons of back differential

1 — Laying
2 — the Stopper of a jellied opening
3 — the Power shaft

4 — the Lock ring
5 — the Epiploon
6 — Lateral transfer
7 — the Drain stopper


 PERFORMANCE ORDER

  1. Lower oil of back differential.
  2. Remove a power shaft, previously having reliably propped up it (see. Section Removal, dismantling, assembly and installation of back power shafts).
  3. By means of the special adaptation remove lateral transfer of differential and remove from it a screw-driver a lock ring.
  4. By means of a special stripper take an old epiploon and press new aflush with an end face of its case.
  5. Put on epiploon edges universal greasing.
  6. Establish on lateral transfer a new lock ring and establish transfer to differential.
  7. Make sure that lateral transfer of differential cannot be pulled out a hand, without the special adaptation.
  8. Establish a power shaft and fill differential with oil according to requirements of Specifications of Head the Transmission line.