LEXUS RX 300

1998 — 2003 of release

Repair and car operation



RX 300 Lexus
+ Lexus RX-300 Cars
+ Governing bodies and operation receptions
- Settings and routine maintenance of the car
   General information
   General information about settings and adjustments
   Schedule of routine maintenance
   Check of levels of liquids, control of leaks
   Check of a condition of tires and pressure of their rating, rotation of wheels
   Replacement of impellent oil and oil filter
   General checks of brake system
   Check and replacement of the salonny filter of a heater and To/in
   Check of a condition and replacement of hoses of an impellent compartment, localization of leaks
   Check of a condition and replacement of belts of a drive of auxiliary units
   Replacement of a filtering element of an air purifier
   Check of a condition of system of production of the fulfilled gases
   Check and replacement of spark plugs
   Replacement of brake liquid, pumping of brake system
   Check of a condition of components of a suspension bracket and steering
   Check of a condition of protective covers of power shafts and driveshaft hinges
   Check of operability of lighting devices, horn and heater fan
   EVAP system check
   Condition check, adjustment and replacement of brushes of screen wipers
   Check of a condition of the battery and care of it
   Replacement of cooling liquid (OZh)
   Check and adjustment of klapanny gaps
   Check and adjustment of a course of pedals of the working and parking brake
   Check of boots of the parking brake
+ Engine
+ Systems of cooling of the engine, heating, ventilation and air conditioning
+ the Power supply system and production of the fulfilled gases
+ Systems of electric equipment of the engine
+ Automatic transmission and interaxal differential
+ Transmission line
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ Schematic diagrams of electric connections




Check of a condition of protective covers of power shafts and driveshaft hinges

 PERFORMANCE ORDER

  1. Protective covers of power shafts are very important elements since they protect hinges of equal angular speeds (CV JOINT) from hit on them of dirt, water and other foreign matters causing damages. External pollution of protective covers by oil and greasings can lead to premature failure of a material of covers therefore it is recommended to wash periodically covers with water with soap.
  1. Examine covers (1) on existence of gaps and cracks, and also the weakened collars (2). In case of detection of signs of cracks or leakage of greasing the cover should be replaced.
  1. At the same time check the general condition of CV JOINTS, holding a shaft and at the same time trying to turn a wheel. Repeat attempt, holding the internal hinge of equal angular speeds and turning a shaft. Any appreciable люфт points to wear of the hinge, wear in grooves of a shaft or weakening of a lock nut of a shaft.
  1. Having glanced under the car, find driveshaft hinges.
  1. Estimate люфт hinges of the driveshaft and if necessary grease them.