RX 300 Lexus + Lexus RX-300 Cars + Governing bodies and operation receptions + Settings and routine maintenance of the car + Engine + Systems of cooling of the engine, heating, ventilation and air conditioning + the Power supply system and production of the fulfilled gases + Systems of electric equipment of the engine + Automatic transmission and interaxal differential + Transmission line + Brake system + Suspension bracket and steering - Body + External equipment and body elements - Salon equipment Removal and installation of the dashboard and main ware box Removal of a carpet of a floor and ware box of the central console Removal and installation of furnish of a ceiling Removal, dismantling, assembly and installation of forward seats Removal, dismantling, assembly and installation of back seats Removal and installation of seat belts and their emergency natyazhitel + Onboard electric equipment + Schematic diagrams of electric connections
|
Removal, dismantling, assembly and installation of forward seats
Components of assembly of a forward seat
Components э / drive of a forward seat
|
- Remove covers directing by means of a screw-driver.
- Turn out 4 bolts, separate sockets and remove a forward seat.
- Remove head restraints.
- Remove buttons of management of the provision of a seat, turn out 4 screws and remove the panel of a pillow of a seat, having separated the electroconducting socket.
- Turn out 3 screws and uncover seat pillows.
- Turn out 2 screws and remove a forward cover of a pillow of a seat.
- Remove from pillow assembly electroconducting, turn out 4 bolts, and remove assembly of a pillow of a seat.
- Remove cutting washers, unhook hooks of a cover of a pillow and remove a cover together with a pillow.
- Remove cutting washers and disconnect a cover from a seat pillow, if necessary remove a heating element of a pillow.
|
- Uncover backs, cutting washers and turn out 4 adjusting bolts.
|
|
Do not pull electroconducting of a lateral safety cushion. |
- Turn out 6 screws and remove internal covers of a pillow of a seat, having disconnected from them electroconducting.
- Remove assembly of a back of a seat.
- Remove cutting washers, turn out 2 screws, unhook the holder and a hook of a cover of a back from a back frame.
- Remove caps of bolts, washers, wavy washers and armrests.
- Remove a back frame.
- On a driver's seat turn out 2 bolts and remove assembly of a lumbar support.
- Remove cutting washers and disconnect a cover from a seat back, if necessary remove a heating element of a back.
- Turn out a bolt and remove the seat belt lock.
- Turn out 2 screws and remove switches of management of the provision of a seat.
- Separate sockets and remove electroconducting.
- On a driver's seat give 2 nuts and remove the relay of management of the provision of a seat and intensifying draft.
- Remove covers directing, give 2 nuts and remove a seat belt arm.
- Remove assembly of the mechanism of adjustment of an inclination of a back together with assembly of vertical draft No. 2 (only on a seat of the driver) and э / the motor of this mechanism.
- On a driver's seat remove vertical draft, vertical draft No. 2 and э / motors of a drive of lifting of forward and back parts of a pillow.
- Remove э / the motor of a drive of moving of a seat.
- Assembly and installation are made upside-down. Tighten fixture with demanded efforts.
|
|
|
|