RX 300 Lexus + Lexus RX-300 Cars + Governing bodies and operation receptions + Settings and routine maintenance of the car + Engine + Systems of cooling of the engine, heating, ventilation and air conditioning + the Power supply system and production of the fulfilled gases + Systems of electric equipment of the engine + Automatic transmission and interaxal differential + Transmission line + Brake system + Suspension bracket and steering - Body + External equipment and body elements - Salon equipment Removal and installation of the dashboard and main ware box Removal of a carpet of a floor and ware box of the central console Removal and installation of furnish of a ceiling Removal, dismantling, assembly and installation of forward seats Removal, dismantling, assembly and installation of back seats Removal and installation of seat belts and their emergency natyazhitel + Onboard electric equipment + Schematic diagrams of electric connections
|
Removal of a carpet of a floor and ware box of the central console
Components of installation of a carpet
|
- Liberate a forward part of a floor covering of a luggage compartment from five clamps and remove it.
- Remove lobbies and back seats (see. Sections Removal, dismantling, assembly and installation of forward seats and Removal, dismantling, assembly and installation of back seats).
- Remove overlays of thresholds of doors, the bottom sections of furnish of the central racks of a body, a cover of racks of a back suspension bracket, lateral furnish of back seats and a footboard.
- Remove in that order the bottom lateral panels, the bottom cover No. 2, the bottom panel No. 2, the panel of furnish of the lock of ignition, the panel of furnish of the central console, the bottom podrulevy panel, the bottom segment of furnish of the central section of the dashboard, lateral segments of furnish of the central console (see. Section Removal and installation of the dashboard and main ware box).
- Remove the top panel of a ware box in the central console, take an opening cap in a ware box, remove 2 caps of screws, turn out 2 screws and remove a plate of a ware box.
|
- Turn out 4 bolts and remove a ware box, separate the socket.
|
- Uncover chassis numbers (see. Introduction).
- Turn out bolts and remove the bottom anchors of seat belts.
- Wring out clamps and remove a carpet.
- Installation is made upside-down. Tighten fixture with demanded efforts, replace the deformed clamps.
|
|
|
|