LEXUS RX 300

1998 — 2003 of release

Repair and car operation



RX 300 Lexus
+ Lexus RX-300 Cars
+ Governing bodies and operation receptions
+ Settings and routine maintenance of the car
+ Engine
+ Systems of cooling of the engine, heating, ventilation and air conditioning
+ the Power supply system and production of the fulfilled gases
+ Systems of electric equipment of the engine
+ Automatic transmission and interaxal differential
+ Transmission line
+ Brake system
+ Suspension bracket and steering
- Body
   + External equipment and body elements
   - Salon equipment
      Removal and installation of the dashboard and main ware box
      Removal of a carpet of a floor and ware box of the central console
      Removal and installation of furnish of a ceiling
      Removal, dismantling, assembly and installation of forward seats
      Removal, dismantling, assembly and installation of back seats
      Removal and installation of seat belts and their emergency natyazhitel
+ Onboard electric equipment
+ Schematic diagrams of electric connections



Salon equipment

Removal and installation of the dashboard and main ware box

Dashboard components

1 — the Intensifying bar
2 — the Returnable spring of a pedal
3 — Assembly of a safety cushion of the forward passenger
4 — the Arm No. 2
5 — the Arm No. 1
6 — the No. Panel 1 dynamics
7 — ECU ABS
8 — the Overlay of the dashboard
9 — body ECU
10 — Assembly of the multipurpose display
11 — the Panel of furnish of the central console
12 — Lateral segments separate the central console
13 — audiosystem Assembly
14 — the Air line
15 — Nizhny a segment of furnish of the central section of the dashboard
16 — the Fringing
17 — the Panel of furnish of the lock of ignition
18 — the Bottom panel of the central section of the dashboard
19 — Assembly of the lever of the selector of AT modes

20 — the Panel of furnish of the bottom console
21 — the Bottom insert
22 — Podrulevaya the panel
23 — Nizhny the holder No. 2
24 — Nizhny the holder No. 1
25 — the Combination of devices
26 — Furnish of a forward rack of a body
27 — Furnish of a combination of devices
28 — the Bottom panel No. 2
29 — a CD changer
30 — the Lateral segment of the dashboard (right)
31 — the Combined switch
32 — the Bottom cover No. 2
33 — the Bottom lateral panel
34 — the Lateral segment of the dashboard (left)
35 — Casings of a steering column
36 — the Steering wheel
37 — Furnish of a threshold of a forward door
38 — the Overlay of a steering wheel

Components of a path of system of ventilation

1 — deflector Furnish обдува a windscreen
2 — deflector Assembly обдува a windscreen
3 — the Overlay of the dashboard
4 — Zaslonka No. 4
5 — the Lateral deflector No. 2
6 — Elektroprovodka
7 — the Air line No. 5 of the lateral deflector
8 — the Air line of the lateral deflector No. 2
9 — the Air line from a heater to a zaslonka No. 4

10 — the Central air line from a heater to a zaslonka
11 — lamp Assembly in a ware box
12 — the Central arm
13 — the Air line from a heater to a zaslonka No. 1
14 — the Air line of the lateral deflector No. 1
15 — the sun Sensor
16 — the Sensor of automatic control of lighting
17 — the Arm No. 1
18 — the Lateral deflector No. 1
19 — Zaslonka No. 1


On сопр. illustrations the type of fixture of the listed components is also specified: letters with A on F designated bolts and screws, by letters G and H – nuts, instead of the components designated by letters fasten clamps.


 PERFORMANCE ORDER

  1. Consistently remove dashboard components 30, 34, 37, 26, 33, 6 and 32, having liberated them from clamps.
  1. Separate the safety cushion socket, trying not to damage electroconducting.
  1. Remove the bottom panel No. 2, having turned out 2 bolts and 2 screws.
  1. At the corresponding complete set turn out 4 nuts, separate the socket and remove a CD changer.
  1. Turn out 2 bolts and 2 nuts and remove safety cushion assembly.

After removal lay safety cushion assembly by the face up. Do not assort safety cushion assembly. At installation tighten fixture with demanded efforts, safety cushion assembly with visible damages replace, do not allow short circuit of electroconducting of a safety cushion.

  1. Remove a steering wheel with a slip, and also casings of a steering column (see. Section Removal, installation, dismantling and assembly of a steering column).
  2. Consistently remove dashboard components 17, 20, 22 and 21, having liberated them from clamps and having turned out in the last two cases on 2 bolts.
  3. Remove a steering column (see. Section Removal, installation, dismantling and assembly of a steering column).
  4. Consistently remove dashboard components 16, 12 and 18, having liberated them from clamps and having turned out in the latter case 6 screws.
  1. Turn out 4 bolts and remove the panel of furnish of the central console.
  1. Separate sockets, turn out on 4 bolts and remove assemblies of the multipurpose display and an audiosystem.
  1. Turn out 2 screws and remove furnish of a combination of devices.
  1. Separate the socket, turn out 3 screws and remove a combination of devices.
  2. Turn out two bolts and remove the bottom holders (23 and 24).
  3. Separate the socket, disconnect draft, give 4 nuts and remove assembly of the lever of the AT selector.
  4. Remove air lines.
  1. Separate sockets, turn out 2 bolts and 2 nuts and remove an overlay of the dashboard.
  1. Give fixture and remove arms No. 1 and No. 2 (4 and 5).
  2. Turn out on 2 nuts and remove modules of management of a body and ABS.
  3. Remove a returnable spring, turn out a bolt, 2 nuts and remove the block of the relay and safety locks under the dashboard.
  1. Turn out 4 bolts and 4 nuts and remove an intensifying bar.
  1. Consistently remove No. No. 11, 12, 18, 5, 1, 2, 7, 14, 8, 13, 9, 19, 4 components, and 10.
  1. Turn out 5 screws, wring out clamps and remove electroconducting.
  1. Turn out 2 screws and remove an arm No. 1.
  2. Remove the sensor of the sun and the sensor of automatic control of lighting.
  3. Installation is made upside-down. Tighten fixture with demanded efforts, replace the deformed clamps.