LEXUS RX 300

1998 — 2003 of release

Repair and car operation


RX 300 Lexus
+ Lexus RX-300 Cars
+ Governing bodies and operation receptions
+ Settings and routine maintenance of the car
+ Engine
+ Systems of cooling of the engine, heating, ventilation and air conditioning
+ the Power supply system and production of the fulfilled gases
+ Systems of electric equipment of the engine
+ Automatic transmission and interaxal differential
+ Transmission line
+ Brake system
+ Suspension bracket and steering
- Body
   + External equipment and body elements
   - Salon equipment
      Removal and installation of the dashboard and main ware box
      Removal of a carpet of a floor and ware box of the central console
      Removal and installation of furnish of a ceiling
      Removal, dismantling, assembly and installation of forward seats
      Removal, dismantling, assembly and installation of back seats
      Removal and installation of seat belts and their emergency natyazhitel
+ Onboard electric equipment
+ Schematic diagrams of electric connections



Removal and installation of seat belts and their emergency natyazhitel

At separation of SRS sockets at the ignition key established in the situation "ON" or "ACC" in memory of the control unit the malfunction code is brought.

Components of installation of forward seat belts

1 — Laying of No. of 1 top section of furnish of the central rack of a body
2 — the Top section of furnish of the central rack of a body
3 — the Cover of the top anchor of a belt
4 — the Seat belt

5 — the Cover of the bottom anchor of a belt
6 — the Bottom section of furnish of the central rack of a body
7 — the belt Lock

Components of installation of back seat belts

1 — the Lateral belt
2 — the Central belt
3 — the Cover of the central belt
4 — the Lateral top finishing panel
5 — the Cover of a rack of a back suspension bracket
6 — the Back lateral panel of furnish
7 — the Bottom lateral panel
8 — the Cover of No. of 1 luggage compartment

9 — the Back panel of furnish of a luggage compartment
10 — the Right back seat
11 — Hooks
12 — Lateral furnish of a back seat
13 — the belt Lock
14 — the Protective casing of the mechanism of adjustment of an inclination of a back
15 — Assembly of a pillow of a seat
16 — the Left back seat


 PERFORMANCE ORDER

  1. Remove overlays of thresholds and consolidation of lobbies and back doors.
  2. Remove both sections of furnish of the central rack of a body.
  3. Uncover the bottom anchor of a forward belt then turn out a bolt and remove an anchor.
  4. Uncover the top anchor of a forward belt then turn out a bolt and remove an anchor.
  5. Separate the socket of a reducer of an emergency natyazhitel.
  1. Wring out a flat screw-driver the button of blocking of the socket of a natyazhitel and separate the socket.
  1. Turn out 2 bolts and remove the belt lock.
  2. Procedure of removal of back seat belts is given in the Section Removal, dismantling, assembly and installation of back seats.
  3. Check seat belts on existence of damages and if necessary replace them.
  4. Installation is made upside-down.

Use new components of SRS system.