LEXUS RX 300

1998 — 2003 of release

Repair and car operation



RX 300 Lexus
+ Lexus RX-300 Cars
+ Governing bodies and operation receptions
+ Settings and routine maintenance of the car
- Engine
   General information and preparatory operations
   Check of kompressionny pressure
   Engine check by means of the vacuum gage
   Reduction of the piston of the first cylinder in the provision of the top dead point (VMT)
   Check of a corner of an advancing of ignition
   Removal, check and installation of a belt of a drive of GRM of its natyazhitel, pulley and cogwheel of a cranked shaft, cogwheels of camshafts and intermediate rollers
   Removal, dismantling, check, assembly and installation of a head of cylinders and its components
   Removal and engine installation, check of support
   Block of cylinders
   Check Д/В of pressure of impellent oil
   Removal, dismantling, check, assembly and installation of the oil pump and case pallet
+ Systems of cooling of the engine, heating, ventilation and air conditioning
+ the Power supply system and production of the fulfilled gases
+ Systems of electric equipment of the engine
+ Automatic transmission and interaxal differential
+ Transmission line
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ Schematic diagrams of electric connections



Check Д/В of pressure of impellent oil

Location Д/В of impellent oil

 PERFORMANCE ORDER

  1. Turn out Д/В and establish on its place a manometer.
  2. Warm up the engine to normal working temperature.
  3. Consider indications of a manometer and compare to requirements of Specifications of Head the Engine.
  4. Remove a manometer and screw to the place of Д/В pressure of impellent oil, previously having greased its carving with fixing hermetic, for example, Loctite 242.
  5. Tighten Д/В with effort of 13 Nanometers.
  6. Start the engine and make sure of absence of leakages of oil.