LEXUS RX 300

1998 — 2003 of release

Removal, dismantling, assembly and installation of the block of the fan of a heater

Components of installation of the block of the fan of a heater


1 — CD changer Assembly 2 — the Right lateral panel of a fairing 3 — the Block of the fan of a heater 4 — the Air line from the passenger party	5 — Burn down electroconductings 6 — the Bottom section No. 2 of the dashboard 7 — the Overlay of a threshold of the right forward door 8 — the Bottom cover No. 2 of the dashboard

Components of assembly of the block of the fan of a heater


1 — the Case of the block of the fan of a heater 2 — Salonny the filter 3 — the Case of the salonny filter	4 — Э / the motor of supply of external air 5 — Э / the motor of the fan of a heater 6 — a filter Cover

PERFORMANCE ORDER

Remove the following parts:
- Right lateral panel of a fairing;
- Overlay of a threshold of the right forward door;
- Bottom dashboard cover No. 2;
- Bottom dashboard section No. 2;
- CD changer assembly (at the corresponding complete set);
- Assembly of a forward safety cushion of the forward passenger (see. Head Onboard electric equipment);
Turn out three screws and remove an air line from the forward passenger.
Separate sockets, weaken a collar of fastening of a plait of electroconducting.
Turn out two bolts, two nuts, the screw and remove the block of the fan of a heater.
Remove the salonny filter of a heater (see. The section Check and replacement of the salonny filter of a heater and To/in).
Turn out on three screws and remove э / the motor of the fan of a heater and э / the motor of supply of external air.
Check serviceability of functioning э / the motor and the sensor of supply of external air.
Assembly and installation are made as it should be, the return to an order of dismantle of components.