LEXUS RX 300

1998 — 2003 of release

Repair and car operation



RX 300 Lexus
+ Lexus RX-300 Cars
+ Governing bodies and operation receptions
+ Settings and routine maintenance of the car
+ Engine
- Systems of cooling of the engine, heating, ventilation and air conditioning
   + System of cooling of the engine
   - Systems of heating, ventilation and air conditioning
      General information
      Replacement, dismantling and To/in block assembly
      Removal, dismantling, assembly and installation of the block of the fan of a heater
      Check and compressor and K/V magnetic coupling replacement
      Removal and To/in condenser installation
      Checks of components of systems of heating and To/in
      Removal and control unit installation
+ the Power supply system and production of the fulfilled gases
+ Systems of electric equipment of the engine
+ Automatic transmission and interaxal differential
+ Transmission line
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ Schematic diagrams of electric connections




Removal and control unit installation

Components of installation of the control panel a heater and To/in

1 — the Top section of the central console;
2 — the Multipurpose display;
3 — the Audiosystem;
4 — Switches

5 — the Electronic control unit the dashboard
6 — the Bottom section of the dashboard
7 — the Control unit a heater and To/in
8 — the Plate


 PERFORMANCE ORDER

  1. Remove the bottom and top sections of the central console (see. A body) then separate the socket of electroconducting of the panel.
  2. Turn out 3 screws and remove the multipurpose display.
  3. Turn out 4 screws and remove many audiosystem.
  4. Turn out 6 screws and remove the block electronic managements of the dashboard.
  5. Turn out 15 screws and remove the control unit a heater and К/В.
  6. Remove switches and a payment.
  7. Installation are made as it should be, the return to an order of dismantle of components.