1998 — 2003 of release

Repair and car operation

RX 300 Lexus
+ Lexus RX-300 Cars
+ Governing bodies and operation receptions
+ Settings and routine maintenance of the car
+ Engine
- Systems of cooling of the engine, heating, ventilation and air conditioning
   + System of cooling of the engine
   - Systems of heating, ventilation and air conditioning
      General information
      Replacement, dismantling and To/in block assembly
      Removal, dismantling, assembly and installation of the block of the fan of a heater
      Check and compressor and K/V magnetic coupling replacement
      Removal and To/in condenser installation
      Checks of components of systems of heating and To/in
      Removal and control unit installation
+ the Power supply system and production of the fulfilled gases
+ Systems of electric equipment of the engine
+ Automatic transmission and interaxal differential
+ Transmission line
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ Schematic diagrams of electric connections

Removal and To/in condenser installation

Components of installation of the To/in condenser

1 — the Condenser
2 — the Sealing ring
3 — the Digit hose

4 — the Liquid tube
5 — the Top casing of a radiator


  1. Discharge К/В system.
  2. Unfasten 7 clamps and remove the top casing of a radiator.
  3. Remove a front bumper (see. Head Body).
  4. Turn out two bolts and separate a digit hose and a liquid tube, then as soon as possible закупорьте open branch pipes.
  5. Disconnect a clip of a liquid tube, turn out two bolts and pull out the condenser.
  6. Installation are made as it should be, the return to an order of dismantle of components. Use new sealing rings of a digit hose and a liquid tube. If the new condenser is established, fill it with refrigerator oil according to requirements of Specifications of the Head of System of cooling of the engine, heating, ventilation and air conditioning.