RX 300 Lexus + Lexus RX-300 Cars + Governing bodies and operation receptions + Settings and routine maintenance of the car + Engine + Systems of cooling of the engine, heating, ventilation and air conditioning - Power supply system and production of the fulfilled gases - Power supply system General information and security measures Sbrasyvaniye of pressure in fuel system Principle of functioning of a control system of fuel injection Checks of system of injection Removal and installation of the fuel pump, sensor of a stock of fuel and regulator of pressure of fuel Removal and installation of fuel distributive highways and injectors Removal and installation of a fuel tank and fuel lines Removal and air purifier installation Removal, installation and adjustment of the case of a throttle and TPS sensor Removal and installation of components of ACIS system + Systems of release and decrease in toxicity of the fulfilled gases + Systems of electric equipment of the engine + Automatic transmission and interaxal differential + Transmission line + Brake system + Suspension bracket and steering + Body + Onboard electric equipment + Schematic diagrams of electric connections
|
Removal and installation of components of ACIS system
ACIS system components
|
- Disconnect a vacuum hose from the activator and separate the DLC No. 1 socket.
- Give 4 nuts and remove the DLC No. 1 socket from its arm. Disconnect a cable of weight and the grounding tire from the ACIS valve.
- Hook the ACIS valve a screw-driver and remove it from the air distributor together with laying.
|
-
At installation grease rubber parts with impellent oil and put a prokladochny material (No. 08826-0008 according to the Toyota/Lexus catalog) on the specified sites of the valve. Use new laying. Tighten nuts with effort of 14.5 Nanometers.
|
|
|
|
|