LEXUS RX 300

1998 — 2003 of release

Repair and car operation



RX 300 Lexus
+ Lexus RX-300 Cars
+ Governing bodies and operation receptions
+ Settings and routine maintenance of the car
+ Engine
+ Systems of cooling of the engine, heating, ventilation and air conditioning
- Power supply system and production of the fulfilled gases
   - Power supply system
      General information and security measures
      Sbrasyvaniye of pressure in fuel system
      Principle of functioning of a control system of fuel injection
      Checks of system of injection
      Removal and installation of the fuel pump, sensor of a stock of fuel and regulator of pressure of fuel
      Removal and installation of fuel distributive highways and injectors
      Removal and installation of a fuel tank and fuel lines
      Removal and air purifier installation
      Removal, installation and adjustment of the case of a throttle and TPS sensor
      Removal and installation of components of ACIS system
   + Systems of release and decrease in toxicity of the fulfilled gases
+ Systems of electric equipment of the engine
+ Automatic transmission and interaxal differential
+ Transmission line
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ Schematic diagrams of electric connections




Removal and installation of the fuel pump, sensor of a stock of fuel and regulator of pressure of fuel

Components of installation of the fuel pump

1 — the Cover of a service opening
2 — I Will corrode electroconductings of the fuel pump and the sensor of a stock of fuel
3 — the Adjusting plate of a ventilating tube of a fuel tank
4 — the Main tube of a fuel tank

5 — the Clamp of connection of a tube 4
6 — Assembly of the fuel pump and the sensor of a stock of fuel
7 — Laying
8 — the Additional reception fuel hose

Assembly of the fuel pump

1 — the Reception plate with the stock sensor
2 — the Fuel filter
3 — the Fuel pump

4 — the Sealing ring
5 — the Regulator of pressure of fuel and a returnable tube
6 — the Support of No. 2 toplivopriyomnik


 PERFORMANCE ORDER

  1. Remove the left section of a back seat and its lateral furnish (see. Head Body).
  2. Unbend a rug of a floor and uncover a service opening.
  3. Separate the socket of electroconducting of the fuel pump and the sensor of a stock of fuel.
  4. Disconnect from a reception plate the main tube of a fuel tank and закупорьте connection.
  5. Turn out 8 bolts and take assembly of the fuel pump with the sensor of a stock of fuel from a fuel tank together with laying, previously having disconnected an additional reception fuel hose from a returnable tube.
  6. Remove a support of No. 2 toplivopriyomnik
  1. Remove assembly of a regulator of pressure of fuel and a returnable tube and disconnect from it a regulator.
  1. Wring out a clamp and remove the filter of a toplivopriyomnik.
  1. By means of two screw-drivers consistently release a support of No. of 1 toplivopriyomnik from four clamps and remove laying No. 2 of the fuel filter.
  1. Remove assembly of the fuel filter and the fuel pump. For this purpose separate the electroconducting socket from the fuel pump, extend the specified assembly and remove laying of No. of 1 fuel filter and a sealing ring of an opening in a toplivopriyomny plate.
  2. Extend the fuel pump from the fuel filter.
  3. Installation is made as it should be, the return to an order of dismantle of components. Use new sealing rings, tighten fixture with demanded efforts.