1998 — 2003 of release

Repair and car operation

RX 300 Lexus
+ Lexus RX-300 Cars
+ Governing bodies and operation receptions
+ Settings and routine maintenance of the car
+ Engine
+ Systems of cooling of the engine, heating, ventilation and air conditioning
- Power supply system and production of the fulfilled gases
   - Power supply system
      General information and security measures
      Sbrasyvaniye of pressure in fuel system
      Principle of functioning of a control system of fuel injection
      Checks of system of injection
      Removal and installation of the fuel pump, sensor of a stock of fuel and regulator of pressure of fuel
      Removal and installation of fuel distributive highways and injectors
      Removal and installation of a fuel tank and fuel lines
      Removal and air purifier installation
      Removal, installation and adjustment of the case of a throttle and TPS sensor
      Removal and installation of components of ACIS system
   + Systems of release and decrease in toxicity of the fulfilled gases
+ Systems of electric equipment of the engine
+ Automatic transmission and interaxal differential
+ Transmission line
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ Schematic diagrams of electric connections

Removal and air purifier installation


  1. Separate the socket of electroconducting of the MAF sensor, turn out two screws and remove the MAF sensor together with laying from an air purifier cover.
  1. Disconnect EVAP hose from EVAP tube, and also PCV hose from a cover of the left number of cylinders.
  1. Wring out two clamps of a cover of an air purifier and remove it from the air purifier case.
  1. Wring out two clamps and disconnect an air purifier hose from the throttle case.
  2. Liberate a torso of a drive of a butterfly valve from a clip.
  3. Uncover an air purifier together with a hose.
  4. Pull out filtering element.
  5. Turn out three bolts and remove the air purifier case.
  6. Wipe the air purifier case pure rags.
  7. Establish a new filtering element in the case, close a cover and fix it clamps.
  8. Join all diconnected connections.