LEXUS RX 300

1998 — 2003 of release

Repair and car operation


RX 300 Lexus
+ Lexus RX-300 Cars
+ Governing bodies and operation receptions
+ Settings and routine maintenance of the car
+ Engine
+ Systems of cooling of the engine, heating, ventilation and air conditioning
+ the Power supply system and production of the fulfilled gases
+ Systems of electric equipment of the engine
- Automatic transmission and interaxal differential
   General information
   Search of malfunctions - the general information
   Replacement of sensors
   Removal and installation of assembly of AT valves
   Checks and AT adjustments
   Removal and installation of a cooler of ATF
   Removal and installation of assembly of the lever of the selector of AT modes
   Removal and AT installation
+ Transmission line
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ Schematic diagrams of electric connections



Removal and installation of assembly of the lever of the selector of AT modes

Components of assembly of the lever of the selector

1 — the Handle of the lever of the selector
2 — the Cap of the handle of the lever of the selector
3 — the Plug of the handle of the lever of the selector
4 — the Spring
5 — the Button of the handle of the lever of the selector
6 — the Main switch of the O/D mode
7 — the Lock core
8 — the Panel of indication of a mode
9 — the Cap of removal of blocking of the lever of the selector
10 — the Directing trench of electroconducting
11 — the Lateral cover
12 — the Pin
13 — the Spring of manual fixing
14 — the Switch of a mode of driving

15 — the Case of the bottom indicator of a mode
16 — the Saddle of a spring of the lever of the selector
17 — the Button of removal of blocking of the lever of the selector
18 — Auxiliary assembly of the lever of the selector
19 — the Damper of vibrations
20 — Assembly of the module of blocking of switching
21 — Draught of switching of modes
22 — the Plug
23 — the Insert of No. of 1 lever of the selector
24 — the Plate of the lever of the selector
25 — the Auxiliary plate of the lever of the selector
26 — the Spring nut
27 — Assembly of a wire of indication of a mode
28 — the Lamp
29 — the Cap


 PERFORMANCE ORDER

  1. Remove the following parts of furnish and the dashboard (see. Body):
    • Bottom cover of No. 2 right parts of the dashboard;
    • No. panel 2 right parts of the dashboard;
    • Finishing panel of the bottom section of the dashboard;
    • Bottom section of the dashboard;
    • Bottom insert;
    • The bottom section of the central dashboard together with the edging;
    • Right and left lateral covers of a covering of a floor;
    • The bottom panel of the central section of the dashboard together with the edging;
    • Bottom finishing section central dashboards.
  1. Turn out 4 nuts and disconnect a cable from assembly of the lever of the selector of AT modes.
  1. Separate three sockets of electroconducting and disconnect it from assembly of the lever of the selector.
  2. Remove assembly of the lever of the selector.
  3. If necessary dismantling and assembly of the lever of the AT selector make according to an illustration Components of assembly of the lever of the selector.
  4. Installation of assembly of the lever of the selector make upside-down.
  5. After installation check serviceability of functioning of the lever of the selector (see an illustration the Lever of the selector of AT modes and the description of modes).