Изобретения, более подробно тут.

LEXUS RX 300

1998 — 2003 of release

Repair and car operation



RX 300 Lexus
+ Lexus RX-300 Cars
+ Governing bodies and operation receptions
+ Settings and routine maintenance of the car
+ Engine
+ Systems of cooling of the engine, heating, ventilation and air conditioning
+ the Power supply system and production of the fulfilled gases
+ Systems of electric equipment of the engine
+ Automatic transmission and interaxal differential
+ Transmission line
- Brake system
   General information and security measures
   Removal, installation and check of pedals of brake system
   Check of brake system via the socket of the module of management
   Removal and installation of the tank and main brake cylinder (GTTs)
   Removal, check and installation of the amplifier of brakes
   Replacement of brake shoes
   Removal, dismantling, check, assembly and installation of supports of brake mechanisms
   Dismantling, check and assembly of the parking brake
   Check of the valve of distribution of brake effort
   Removal and installation of the activator of brakes
   Removal and installation of wheel sensors
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ Schematic diagrams of electric connections



Removal and installation of wheel sensors

Forward sensor of speed

Back sensor of speed

Forward sensor of speed

 PERFORMANCE ORDER

  1. Remove a forward wheel and a loker of his arch.
  2. Separate the socket of the sensor of speed.
  3. Turn out a bolt and remove the holder of a flexible hose and electroconducting of the sensor of speed from a suspension bracket rack.
  4. Remove from a suspension bracket rack a rubber clip, turn out a bolt and remove from a car body the holder of electroconducting of the sensor of speed.
  5. Screw a bolt and remove the sensor of speed from a rotary fist.

Forward sensor of speed

 PERFORMANCE ORDER

  1. Remove a back seat, a protective plate and lateral furnish of a seat.
  2. Separate the socket of electroconducting of the sensor of speed and extend it it together with consolidation.
  3. Turn out two coupling bolts of fastening of electroconducting of the sensor of speed to a body and a suspension bracket rack.
  4. Turn out a bolt and remove the sensor.