LEXUS RX 300

1998 — 2003 of release

Repair and car operation


RX 300 Lexus
+ Lexus RX-300 Cars
+ Governing bodies and operation receptions
+ Settings and routine maintenance of the car
+ Engine
+ Systems of cooling of the engine, heating, ventilation and air conditioning
+ the Power supply system and production of the fulfilled gases
+ Systems of electric equipment of the engine
+ Automatic transmission and interaxal differential
+ Transmission line
- Brake system
   General information and security measures
   Removal, installation and check of pedals of brake system
   Check of brake system via the socket of the module of management
   Removal and installation of the tank and main brake cylinder (GTTs)
   Removal, check and installation of the amplifier of brakes
   Replacement of brake shoes
   Removal, dismantling, check, assembly and installation of supports of brake mechanisms
   Dismantling, check and assembly of the parking brake
   Check of the valve of distribution of brake effort
   Removal and installation of the activator of brakes
   Removal and installation of wheel sensors
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ Schematic diagrams of electric connections



Check of the valve of distribution of brake effort

 PERFORMANCE ORDER

  1. Establish a special manometer on the union of pumping of a support of the back brake mechanism and pump over air (see. Section Replacement of brake liquid, pumping of brake system).
  1. Create in GTTs pressure of 29.04 atm and consider manometer indications. Pressure should coincide with pressure in GTTs.
  2. Create in GTTs pressure of 77.46 atm and consider manometer indications. Pressure should make 58.1 atm.
  3. If results of check appeared unsatisfactory, replace the valve.