LEXUS RX 300

1998 — 2003 of release

Repair and car operation


RX 300 Lexus
+ Lexus RX-300 Cars
+ Governing bodies and operation receptions
+ Settings and routine maintenance of the car
+ Engine
+ Systems of cooling of the engine, heating, ventilation and air conditioning
+ the Power supply system and production of the fulfilled gases
+ Systems of electric equipment of the engine
+ Automatic transmission and interaxal differential
+ Transmission line
- Brake system
   General information and security measures
   Removal, installation and check of pedals of brake system
   Check of brake system via the socket of the module of management
   Removal and installation of the tank and main brake cylinder (GTTs)
   Removal, check and installation of the amplifier of brakes
   Replacement of brake shoes
   Removal, dismantling, check, assembly and installation of supports of brake mechanisms
   Dismantling, check and assembly of the parking brake
   Check of the valve of distribution of brake effort
   Removal and installation of the activator of brakes
   Removal and installation of wheel sensors
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ Schematic diagrams of electric connections



Removal, installation and check of pedals of brake system

Check and adjustment of a course of pedals of the working and parking brake are given in the Section Check and adjustment of a course of pedals of the working and parking brake.

Components of installation of a pedal of a working brake

1 — the Plug
2 — the Pillow
3 — the Pin
4 — the Wavy washer

5 — the Pedal of a working brake
6 — the Overlay of a pedal
7 — Shplint
8 — the Returnable spring

Components of installation of a pedal of the parking brake

1 — the Socket of the switch of the parking brake
2 — Assembly of a pedal of the parking brake
3 — the Switch of the parking brake

4 — the Pedal of a drive of the parking brake
5 — the Overlay of a pedal
6 — the Cable of the parking brake
7 — the Clip


 PERFORMANCE ORDER

  1. Below the description of removal of a pedal of a drive of the parking brake is provided.
  2. Remove the bottom left section of the dashboard (see. Head Body).
  3. Release a pedal of the parking brake.
  4. Separate the socket of electroconducting of the switch of the parking brake
  5. Give 3 nuts and remove assembly of a pedal of a drive of the parking brake.
  6. Remove a clip and disconnect a torso of a drive of the parking brake.
  7. Turn out the screw and remove the switch of the parking brake.
  8. Remove from a pedal a slip.
  9. Installation is made upside-down.