1998 — 2003 of release

Repair and car operation

RX 300 Lexus
+ Lexus RX-300 Cars
+ Governing bodies and operation receptions
+ Settings and routine maintenance of the car
+ Engine
+ Systems of cooling of the engine, heating, ventilation and air conditioning
+ the Power supply system and production of the fulfilled gases
+ Systems of electric equipment of the engine
+ Automatic transmission and interaxal differential
+ Transmission line
+ Brake system
+ Suspension bracket and steering
- Body
   - External equipment and body elements
      Removal and installation of the top strut of an impellent compartment
      Removal and installation of bumpers
      Removal and installation of a cowl, its lock and decorative reshyotka of a radiator
      Removal, installation, dismantling and assembly of a forward door and its components
      Removal, installation, dismantling and assembly of a back door and its components
      Removal, dismantling, assembly and installation of a door of a back and its components
      Removal and installation of cleaners and windscreen fairing
      Removal and installation of moldings
      Removal and spoiler installation
      Removal and installation of the top hatch
   + salon Equipment
+ Onboard electric equipment
+ Schematic diagrams of electric connections

Removal and installation of the top hatch

Components of the top hatch

1 — a hatch Frame
2 — the Basic arm
3 — Directing cables
4 — the Driving mechanism
5 — the Stopper of a driving cable
6 — the Water modular trench
7 — the Directing plate
8 — the Arm

9 — the Arm of the forward salonny lamp
10 — the Panel of a vetrootboynik
11 — Glass
12 — the Central holding frame
13 — the Block directing
14 — the Driving cable
15 — the Shading screen


  1. Remove a covering of a ceiling of salon (see. Section Removal and installation of furnish of a ceiling).
  2. Remove basic a hatch arm.
  3. Give 4 nuts and remove glass of a cover of the hatch up.
  4. Separate the socket, wring out 4 clamps and disconnect from the case of 4 drain tubes.
  5. Turn out 12 bolts and remove 6 arms.
  6. Give 6 nuts and remove from a body the hatch case.
  7. If necessary dismantling and assembly of the hatch make according to an illustration Components of the top hatch.
  8. After assembly and installation adjust the provision of a cover of the hatch, moving it at the released fixture. Fixture tighten with demanded efforts.