1998 — 2003 of release

Repair and car operation

RX 300 Lexus
+ Lexus RX-300 Cars
+ Governing bodies and operation receptions
+ Settings and routine maintenance of the car
+ Engine
+ Systems of cooling of the engine, heating, ventilation and air conditioning
+ the Power supply system and production of the fulfilled gases
+ Systems of electric equipment of the engine
+ Automatic transmission and interaxal differential
+ Transmission line
+ Brake system
+ Suspension bracket and steering
- Body
   - External equipment and body elements
      Removal and installation of the top strut of an impellent compartment
      Removal and installation of bumpers
      Removal and installation of a cowl, its lock and decorative reshyotka of a radiator
      Removal, installation, dismantling and assembly of a forward door and its components
      Removal, installation, dismantling and assembly of a back door and its components
      Removal, dismantling, assembly and installation of a door of a back and its components
      Removal and installation of cleaners and windscreen fairing
      Removal and installation of moldings
      Removal and spoiler installation
      Removal and installation of the top hatch
   + salon Equipment
+ Onboard electric equipment
+ Schematic diagrams of electric connections

порно видеочат без регистрации.
школа воровского
Телеграм сливов тут.
На сайте заправка картриджей невский.
Какой же фундамент для дома выбрать?

Removal and spoiler installation

Components of installation of a spoiler

1 — the Spoiler
2 — Lateral protection
3 — the Sealing plug


  1. Remove two sealing plugs and two bolts.
  2. Paste over a body round a spoiler with protective paper and heat up a spoiler to temperature 40 ÷ 60 hail.
  1. By means of the string which has been reeled up on two whetstones, cut gluing layer of fastening of a spoiler.

Do not damage a body.

  1. Disconnect a spoiler from clamps.
  2. Heat up a body in a place of fastening of a spoiler to it to temperature 40 ÷ 60 hail. also clear a body of the glue remains.
  3. At a reuse of a spoiler heat up it to temperature 20 ÷ 30 hail. also clear of the glue remains.
  4. Establish on a spoiler new elements of lateral protection.
  5. Establish a spoiler, plugs and tighten fixing bolts.